LCN 4110 Series Peel-N-Stick Product Manual Download

Page: 57 / 74

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100

PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10

HOW-TO-ORDER
4040T SERIES CLOSERS

1. SPECIFY FINISH

Standard Powder Coat __________

Aluminum, Dark Bronze , Statuary,
Light Bronze, Black, Brass.

Closer will be shipped with:

- STANDARD CLIP-ON COVER,

- STANDARD ARM,

- TRACK ROLLER,

- STANDARD TRACK,

- SELF-REAMING and TAPPING SCREWS,

unless options listed below are selected.

CLOSER OPTIONS

COVER

Metal (specify right or left hand) (MC)

FINISH

Custom Powder Coat (RAL) ___________

(handed metal cover required)

Plated Finish, US ______________

(handed metal cover required)

SRI primer

TRACK

Regular with Bumper (BUMPER)

Hold-Open (HO)

Hold-Open with Bumper (HBUMPER)

SPECIFY SCREW PACK

TB* w/Self-Reaming and Tapping (TBSRT)

Wood & Machine Screw (WMS)

TB*, Wood & Machine Screw (TBWMS)

TORX Machine Screw (TORX)

TB* & TORX Machine Screw (TBTRX)

* Specify door thickness if other than 1 3/4”.

INSTALLATION ACCESSORY

Plate, 4040T-18

Plate, 4040T-18TJ

SPECIAL TEMPLATE

ST- _________

Indicates recommended range of door width for closer size.

REDUCED OPENING FORCE 4040T CLOSERS

CAUTION !

Any manual door closer, including those certified by BHMA to

conform to ANSI Standard A156.4, that is selected, installed and adjusted
based on ADA or other reduced opening force requirements may not provide
sufficient power to reliably close and latch a door.

Refer to POWER OPERATORS section for information on systems that meet
reduced opening force requirements without effecting closing power.

TABLE OF SIZES

Non-Sized 4041T cylinder is adjustable from sizes 1 thru 4 and is
shipped set to size 3.

* Maximum opening force

LCN

4040T SERIES

size 3

size 4

4041T

INTERIOR DOOR WIDTH

26"

660mm

34"

868mm

38"

965mm

48"

1219mm

DOOR WIDTH

36"

42"

48"

8.5* lbs.

N/A

5.0* lbs.

4041T

Minimum

Door

Width

Summary of Contents for 4110 Series Peel-N-Stick











































































Search results

Summary of Contents for 4110 Series Peel-N-Stick

Reviews:

Related manuals for 4110 Series Peel-N-Stick

Brands by name

Popular brands

LCN 4110 Series Peel-N-Stick, Product Manual

Search results

Summary of Contents for 4110 Series Peel-N-Stick

Reviews:

Related manuals for 4110 Series Peel-N-Stick

Brands by name

Popular brands