WALL POCKET MOUNTING
Cylinder mounts on wall.
Track mounts on hinge side of door.
MAXIMUM OPENING
Templating allows 90° only.
Hold-open point 90° with magnet.
Dimension 1
is the distance from
the centerline of the closer shaft to
the centerline of the hinge or pivot.
For pocket pivot or total door hinge,
9 1/2” (241 mm).
For butt hinge 8” (203 mm).
For center pivot 10” (254 mm).
Dimension 2
is the distance from
the centerline of the pivot or hinge to
the cylinder mounting surface.
For pocket pivot 4 1/2” (114 mm).
For total door hinge 3 7/8” (98mm)
For butt hinge 2 7/8” (73 mm).
For center pivot 4 1/2” (114 mm).
Dimension 3
is the distance from
the centerline of the pivot or hinge to
end of the track.
For pocket pivot or total door hinge,
3 7/8" (98mm).
For butt hinge 2 3/8" (60mm).
For center pivot 4 5/8" (117mm).
LCN
4000T SERIES
Butt Hinges, Pocket Pivot, Total Door Hinge
or
Center Pivot
are
door mounting options.
Butt Hinges
should not exceed 5” (127 mm).
Pocket Depth,
See above table for distance required between door and
closer mounting location. This dimension is measured from the cylinder
mounting surface to the pull side face of the door at 90°.
Wall Magnet SEM 7850
is recommended. Use of other magnets may
require special construction to alter the depth of the pocket at the
magnet location. See Fire Life Safety Section.
Options
Metal cover.
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
72
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10
