LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10
LCN
4040 SERIES
Clearance
for 4040-62EDA is 5 1/2” (140 mm) from door
face. 6” (152 mm) for CUSH.
Head Frame
flush or rabetted requires CUSH FLUSH
PANEL ADAPTER, 4040-419.
CUSH ARM
requires SHOE SUPPORT, 4040-30 for fifth
screw anchorage for narrow frames.
Delayed Action
(not available on 4040XP) Add suffix
“DEL” to selected cylinder (eg. 4041 DEL). Delays closing
from maximum opening to; 115˚ with 180˚ template.
95˚ with 110˚ template. 85˚ with 100˚ template.
75˚ with 90˚ template.
Delay time adjustable up to approximately 1 minute.
4040 SERIES EDA MOUNT
4040 SERIES CUSH MOUNT
MAXIMUM OPENING
EDA arm can be templated for
points at: 110°,
A = 6 3/8” (162 mm)
B = 7 3/4” (197 mm)
or 180°.
A = 2 7/8” (73 mm)
B = 4 1/4” (108 mm)
Hold-open points up to maximum
opening with HEDA arm.
CUSH arms can be templated for
opening/hold-open point at:
85°,
A = 7 15/16” (202 mm)
B = 9 1/8” (232 mm)
90°,
A = 7 3/16” (183 mm)
B = 8 1/2” (216 mm)
100°,
A = 6 1/16” (154 mm)
B = 7 1/4” (184 mm)
or 110°.
A = 5 1/16” (129 mm)
B = 6 3/8” (162 mm)
Spring Cush dead stop points
are approximately 5˚ more than
templated stop point. Hold open
at templated stop points.
Mounting details are the same as
4040 Series REGULAR or HOLD-
OPEN except as listed below.
4040 Series closers ordered with
EDA or CUSH arms include 4040-
201 FIFTH HOLE SPACER to
support the shoe.
44
