LCN 4110 Series Peel-N-Stick Product Manual Download Page 55

Page: 55 / 74

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100

PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10

LCN

4040T SERIES

CYLINDERS

CYLINDER, 4041T-3071

Standard, non-handed cast iron cylinder assembly.

COVERS

COVER, 4040T-72

Standard, non-handed plastic clip-on cover.

METAL COVER, 4040T-72MC

Optional, handed cover. Required for plated finishes and
custom powder coat finishes.

ARMS

STANDARD ARM, 4040T-3077T

Non-handed arm.
Arm does not include track roller.

DOUBLE EGRESS ARM, 4040T-3077DE

Optional, handed arm for double egress doors and frames.
Arm does not include track roller.
Maximum reveal is 2 11/16” (68mm).

TRACKS

STANDARD TRACK, 4040T-3038

Standard, non hold-open, non-handed track.
Will accept hold-open clip and/or bumper assembly.

STANDARD TRACK with BUMPER, 4040T-3038B

Optional non hold-open, non-handed track with bumper
assembly installed.
Will accept hold-open clip.

HOLD-OPEN TRACK, 4040T-3038H

Optional, non-handed track with hold-open clip installed.
Will accept bumper assembly.

HOLD-OPEN TRACK with BUMPER, 4040T-3038HB

Optional, non-handed track with hold-open clip and bumper
assembly installed.

3077T

3077TDE

3038

72MC

3038B
3038H
3038HB

3071

Summary of Contents for 4110 Series Peel-N-Stick











































































Search results

Summary of Contents for 4110 Series Peel-N-Stick

Reviews:

Related manuals for 4110 Series Peel-N-Stick

Brands by name

Popular brands

LCN 4110 Series Peel-N-Stick, Product Manual

Search results

Summary of Contents for 4110 Series Peel-N-Stick

Reviews:

Related manuals for 4110 Series Peel-N-Stick

Brands by name

Popular brands