LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10
APPLICATIONS
For aluminum, hollow metal, or wood swinging doors and frames.
Can be used with hinge or pivot mounted door.
Adapter plates and other installation accessories available for
unusual conditions.
FEATURES COMMON TO 4000 SERIES
Each closer (except 4040, 4040T, 4030, 4030T) is designed for a
specific mounting; hinge side, top jamb, or parallel arm. 4040 closer
with regular or hold-open arm mounts hinge side or top jamb. P4030
& P4040 closers include 62PA SHOE required to parallel arm mount
either regular or hold-open arm.
Handed for right or left swinging doors, except 4000T, 4030, 4030T,
4040, and 4040T.
Closers to meet ADA reduced opening force requirements except
4000T.
Adjustable hydraulic backcheck cushions opening swing prior to 90°.
Separate regulation of general closing speed and latching speed.
Joints in regular arm and shoe adapt to uneven trim.
Reversible shoe to boost latching power on double lever arms.
Available in a wide range of standard or optional custom powder
coat finishes to blend with door and frame.
Plated finishes available to accent door and frame.
Not designed for exterior mounting or exposed to elements.
DESIGN ASSISTANCE
LCN has been providing reliable solutions to unique door control
problems for over 75 years. Design and specification assistance are only
a phone call away.
Contact LCN for assistance or technical information at
800-526-2400
or
FAX
800-248-1460 (Customer Service)
, Fax
815-879-1495
for
Application Engineering.
WARRANTY
10 year limited warranty. See General Section for complete warranty
details.
SPECIFICATIONS
Refer to ”SPECIFICATIONS” section for suggested architectural
specifications.
MATERIALS
High strength
cast iron
cylinder.
Forged steel
main arms.
One piece
forged steel
piston.
Double heat treated
pinion.
All weather fluid
eliminates seasonal adjustments temperatures
ranging from 120° F (49° C) to -30°F.(-35° C).
High efficiency
,
full complement
, low friction bearings.
Tamper resistant regulating screws.
Full rack and pinion hydraulic action.
Quiet, low friction track and roller combination for all single lever
arm closers.
FINISHES
Available in six standard or optional custom powder
coat finishes to blend with door and frame.
4000 SERIES
LCN’s powder coat finish surpasses 100 hours of salt spray which
is over four times the ANSI standard for corrosion resistance.
For installations where a higher level of corrosive resistance is
required, LCN offers an optional special rust inhibiting (SRI) pre-
treatment. Closers that combine the exclusive LCN powder coat
finish and the SRI pre-treatment exceed the ANSI standard for
corrosion resistance even further.
Plated finishes are available as an option to accent door and frame.
(SRI not available with plated finishes)
LISTINGS & APPROVALS
UL listed for self-closing doors without hold-open under "SWINGING
DOOR CLOSERS"(GVEV) file R1943.
Tested and certified under ANSI Standard A156.4 Grade One. Consult
factory for details.
Consult factory for other listings such as; cUL, California State Fire
Marshal, Bureau of Standards and Appeals.
POSITIVE PRESSURE
LCN closers have been certified for three hours by UL to be in
compliance with UBC 7-2 (1997) and UL 10C. Contact LCN for specific
details on door closer fire ratings.
FASTENERS
4010, 4010T, 4020, 4020T, 4040, 4040T, 4110, 4110T series closers are
shipped with: A standard SELF-REAMING and TAPPING SCREW (SRT)
pack contains Philips head SRT screws to install the closer 4000T series
closers are shipped with: A standard WOOD and MACHINE SCREW
(WMS) pack contains Philips head wood and machine screws to install
the closer. 4030, 4030T series closers are shipped with: A standard
WOOD and SELF-TAPPING MACHINE SCREW (WMS) pack that contains
Phillips head wood and self-tapping machine screws to install the
c l o s e r .Standard LCN thru bolts (TB) can be installed on 1 3/4” (44 mm)
thick doors with 1/4-20 machine screws. Optional thru bolt (TB) sizes
are available for 1 5/8” (41 mm) or 1 3/8” (35 mm) door thickness, but
this must be specified when ordering.
Notes:
1.
For Thru Bolts, specify door thickness if other than 1 3/4” (44mm).
2 .
Phillips head, metric machine screws are available, please specify.
3.
LCN recommends the use of wood screws, available in optional
WMS screw packs, for wood door applications.
MAINTENANCE
Closers mounted according to LCN installation instructions require no
periodic maintenance or adjustments.
2
