For technical assistance call
1
NA / LATAM
// 704.752.6513 • 888.55.INVUE
EMEA
// +31.23.8900150
APAC
// +852.3127.6811
LIVE Slider Lock LL101
8
Slide the panels into the closed
position. The strike plate should
emerge from between the 2
panels.
5
Lightly tighten the 2 screws to
hold the strike plate in place.
4
Place the strike plate onto the
back panel.
7
Fully tighten the screws.
6
Pull the red tab to expose the
adhesive.
Note:
Back the screws off slightly
if the tab is not easy to pull.
3
Back the 2 plastic screws out to
allow it to fit over the panel.
2
Use the provided alcohol wipe
to clean the edge of the BACK
panel where the strike plate
will be mounted. Allow it to dry
completely.
1
Optional:
For ease of installation, use an
Installer Key (if you have one)
to unlock the lock. If using the
Installer Key in a lock with the
battery tabs in place, it will pause
the lock in an unlocked state.
