LS-CS-M-023
PCSS-F Additions Technical Manual
Page 2-1
Original Language Version:
1.02
Released:
03/12/2013
2
2
F
F
I
I
O
O
0
0
4
4
I
I
n
n
p
p
u
u
t
t
/
/
O
O
u
u
t
t
p
p
u
u
t
t
M
M
o
o
d
d
u
u
l
l
e
e
2
2
.
.
1
1
C
C
N
N
1
1
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
CN1 provides a power supply connection on the I/O module via a 5-way removable terminal
block, which is used for all inputs and outputs. A 24 VDC output is derived from this input
power supply connection and provided on the terminals for energising each of the standard
inputs. Each of these 24 VDC outputs has an on-board 5 Amp fuse. Should this current be
exceeded and the fuse triggered, the fuse can be reset by removing the power to the I/O
module and then re-applying.
The power supply input connection allows for 15 A maximum current for the I/O module.
Caution:
To ensure that the power supply chosen has the required current capability and the
maximum current for these inputs is not exceeded, it is important to give careful
consideration to the amount of current to be drawn by the outputs and supply
voltages from the I/O module.
A power supply LED indicator displaying the status of the power connection is located adjacent
to CN1. Connections are shown in
below.
24VDC
24VDC
PE
0VDC
FIO04
–
CN1
1
2
3
4
0VDC
5
24 VDC Supply
0 VDC Supply
0 VDC Supply
15A
Figure 2-1: PCSS-F Series I/O Module Power Connections
Power Supply Specifications
Input points
2
Input voltage
24 VDC ± 10%
Input current
15 A total
2
2
.
.
2
2
C
C
N
N
2
2
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
CN2 has connections for outputs to control the solenoid valves on the press brake via a 7way
removable terminal block. These outputs are a combination of three dual outputs (Y00 to Y02)
and one standard outputs (Y03).
2
2
.
.
3
3
C
C
N
N
3
3
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
CN3 houses connections for an Emergency Stop contactor with feedback via an 8-way
removable terminal block. A single dual output (Y04) and pulsed input combination (X00 / P00)
is available for these connections.
2
2
.
.
4
4
C
C
N
N
4
4
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
Foot switches, up and down and error reset switch connections are available on CN4 via a 14-
way removable terminal block. The connections consist of two pulsed input combinations (X01
to X02 / P01 to P02) and seven standard inputs (X03 to X09). A 24 VDC connection is also
provided for energising when switched to the standard input.
