LS-CS-M-023
PCSS-F Additions Technical Manual
Page 4-31
Original Language Version:
1.02
Released:
03/12/2013
B12-31
B11
B10
B9
B8
B7
B6
B5
B4
B3
B2
B1
B0
N/A
Station
4
Station
3
Station
2
Station
1
N/A Station
02
4H-
4H
4H-
2F
2F-
2F
2H-
2H
2H-F F-F
If a single station mode is selected then the 1 Foot
–
1 Foot mode is selected and the
corresponding station B8 to B11 is selected by the CNC. If the mode selected on the CNC is
the 2 Foot - 2 Foot dual operator mode, both operator stations will be allowed to initiate down
movement, when two corresponding stations B8 to B11 are selected by the CNC.
4.5.2.1
Option Selection
To select down switch option 6 during the PCSS configuration, set the initial value for down
switch option selection variable to
6
as described the F Series Technical Manual. This will
ensure that this option and all required inputs are initialised when the PCSS software is started.