mc²96 Installation & Service Guide
Version: 1.0/3
57/65
5. Service Procedures
3.
Now loosen the unit from the console frame. There are two hex nuts on each side of the unit holding it in
place:
4.
Carefully remove the unit by sliding it forwards and out of the console frame. Take care that the frame
does not scrape the unit, and that the cables do not get caught.
5.
Slide the replacement unit into the console frame, taking care not to scratch the unit or get any cables
caught underneath. Tighten the nuts to hold the unit in place.
6.
Replace the panel (see step 1).
Once the control surface is powered, the switch will boot within a few seconds.
7.
the Bayserver to refresh the communication with the control system.