LAVAZZA Blue LB 2000, Instructions For Installation And Use Manual

Page: 29 / 102

• 29 •
ENGLISH
On such occasions the condition of the filter inside the tank must also be
checked.
The filter can be cleaned with warm water.
Turn slightly to fit the filter back in place.
11.3 Cleaning the dreg drawer
The dreg drawer must be emptied and cleaned every time the machine
indicates to do so.
For directions on how to carry out this operation see section 4.7.
In addition, whenever maintenance is performed on the machine it is a good
idea to remove and clean the dreg drawer accordingly.
A
On such occasions it is also recommended to clean the grills on which the small
and large cups rest.
Check that the cup rest (A) can turn freely without impediments.
11.4 Cleaning the pod loading tray
Check the condition of the pod tray and if necessary clean it using a cloth
dampened with water.
Warning. Do not use detergents to clean the tray, as it may be
difficult to remove detergent residues.
Check that the tray slides smoothly and easily
11.5 Descaling
Warning.
Never use vinegar, as this would cause damage to the machine!
Descaling serves to remove limescale deposits from surfaces and openings
in the water circuit, thereby keeping the valves, heating controls and other
important elements in perfect working order.
Important. Given the complexity of the machine water circuit,
the descaling procedure described below is not able to reach all
components.
In fact, components such as the brew unit and the plastic pin/valve con-
necting it are excluded from the cycle.
The descaling procedure must be carried out regularly, every 3 – 4 months. In
areas where the water hardness is very high, we recommend more frequent
descaling.
Should the user not decalcify the machine at the recommended intervals, this
machine is equipped with a special counter that (if activated via the appropriate
menu), according to the quantity of water dispensed, warns of the necessity to
carry out this operation urgently.
In such a case the display will show this message.
10:30 11 Feb 04
Ready
Please descale
When this message appears, the machine will continue to work but should be
descaled as soon as possible.
Go to the service menu as directed in section 10.2 and display the descaling
menu.
3
Descale
Using the appropriate commands, select “Do it now” to launch the descaling
cycle.
3.3.
Do it now
Note: the descaling cycle cannot and must not be interrupted.
The machine heats the boiler to the correct temperature for carrying out
the decalcification cycle properly. If the machine has just been switched on,
the boiler is preheated. If the machine is hot, an automatic cooling cycle is
performed, dispensing water into the drip tray.
Descale
Warming up
Wait please...
Mix the descaling agent with water as directed on the product package.
Note: it is advisable to use up to 1 litre of the prepared solution for
the decalcifying process.
Descale
Insert descal.
Ent. to start
Warning. Use only a non-toxic, non-harmful descaling product
specific for coffee machines.
Pour the descaling solution into the tank and then place the tank in the
machine.