LAVAZZA Blue LB 2000, Instructions For Installation And Use Manual

Page: 27 / 102

• 27 •
ENGLISH
10.4 Description of programming menu 10.5 Description of service menu
Menu Notes
Password Required only if other than 0.
0. Exit
Press ENTER to quit.
1. Identification 1.1. Machine code Machine identification code.
1.2. Model Read only.
1.3. Version Read only.
1.4. Asset Number Service provider identification code.
2. Setup 2.1. Temperatures
2.1.1. Std. temperature
Default: 100°C
Operating temperature when machine is
“warmed up”.
2.2. Programme doses
2.2.1. Dose water short
Default: 150
2.2.2. Dose water long
Default: 250
Qty. small drink (it is a numerical parameter
without any physical equivalent, e.g. cc).
Qty. large drink (it is a numerical parameter
without any physical equivalent e.g. cc).
2.3. Prebrewing
Default: Medium
Prebrewing time.
2.4. Ventilate
Default: No
Enables/disables rinse cycle when machine is
switched on (this function will only be performed
when the machine is cold).
2.5. Descale
2.5.1. Water hardness
Default: 1
2.5.2. Descal. warning
Default: Yes
Range: 0-4 - Water hardness setting to
determine the quantity of water after which the
machine will signal a descaling alarm.
0 = disables the descale control function.
Enables/Disables display of descaling alarm.
2.6. Filter warning
Default: No
Enables/Disables display of an alarm message
indicating that the filter needs replacing.
2.7. Credits
2.7.1. Credit control
Default: No
2.7.2. Credits warning
Default: No
Enable/Disable the dispensing control via credit
management.
Enable/Disable the display of alarms “Credit
low” and “No credit”
2.8. Payment method
2.8.1. Enable system
Default: No
2.8.2. Display credit
Default: No
Enables/Disables brewing/dispensing by
means of an external coin mechanism.
Enables/Disables display of the amount inser-
ted in the coin box.
2.9 Grounds control
Default: Yes
It enables/disables the machine to brew without
checking the number of used pods in the dump
box.
3. Save energy 3.1. Stand-by enabled
Default: No
Enables/disables stand-by function.
3.2. Ritardo stand-by
Default: 10
Elapsed time in minutes since last use before ma-
chine switches off when in the Stand-by time band.
3.3. Monday
3.3.1. Switch on time
Default: 08.00
3.3.2. Switch off time
Default: 20.00
It enables you to program the machine ON/OFF
times for Monday.
3.4. Tuesday
3.4.1. Switch on time
3.4.2. Switch off time
It enables you to program the machine ON/OFF
times for Tuesday.
3.5. Wednesday
3.5.1. Switch on time
3.5.2. Switch off time
It enables you to program the machine ON/OFF
times for Wednesday.
3.6. Thursday
3.6.1. Switch on time
3.6.2. Switch off time
It enables you to program the machine ON/OFF
times for Thursday.
3.7. Friday
3.7.1. Switch on time
3.7.2. Switch off time
It enables you to program the machine ON/OFF
times for Friday.
3.8. Saturday
3.8.1. Switch on time
3.8.2. Switch off time
It enables you to program the machine ON/OFF
times for Saturday.
3.9. Sunday
3.9.1. Switch on time
3.9.2. Switch off time
It enables you to program the machine ON/OFF
times for Sunday.
4. Security 4.1. Password
Default: 000000
sets the password for accessing the
programming menu (6 digits)
4.2. Service password
Default: 0000
sets the password for accessing the service
menu (4 digits)
5. Reset to default selecting “Yes” will restore all default settings
Menu Notes
Password Required only if other than 0
0. Exit press ENTER to quit
1. Date & Time 1.1. Time Sets the current time
1.2. Date
1.2.1. Day
1.2.2. Month
1.2.3. Year
1.2.4. Day of the week
2. Audit 2.1. Last init Read only - Date and time of last
initialization
2.2. Last reset Read only - Date and time of last reset
2.3. P1 from reset Number of type 1 products (espressos)
since last reset.
2.4. P2 from reset Number of type 2 products (large
coffees) since last reset.
2.5. P3 from reset Number of type 3 products (manual
dispensing cycle) since last reset.
2.6. P1 from init Number of type 1 products (espressos)
since the beginning of the machine’s life.
2.7. P2 from init Number of type 2 products (large
coffees) since the beginning of the
machine’s life.
2.8. P3 from init Number of type 3 products (manual
dispensing cycle) since the beginning of
the machine’s life.
2.9. Reset Audit Selecting “Yes” will clear all partial
counters.
3. Descale 3.1. Qty till descale Remaining quantity of water to be
dispensed before having to perform next
decalcification (expressed in litres).
3.2. Final descale Date and time of last descaling.
3.3. Do it now Pressing “Enter” will launch a descaling
cycle.
4. Wash filter The new filter installed in the machine
undergoes a rinse cycle.
5. Errors 5.1. Error log
5.1.1. Display of errors with
up/down keys
The last N errors can be displayed:
index 0 = error of oldest date. May be
accessed only if there is at least one
error.
5.2. Reset log Selecting “Yes” will delete the list of the
last errors.
5.3. Errors reset Selecting “Yes” will cancel any Out-
of-Service conditions that do not
automatically reset.
6. Credits 6.1. Add credits
0
The value indicates the number of
credits that are to be added to those
already in the machine.
6.2. Zero credits
Default: No
Select “Yes” to zero all credits in the
machine.
6.3. Alarm level
0
The value indicates the quantity of
residual credits below which the
message “Credit low” is displayed.
Note: the message is only displayed
if enabled.