44
45
4. Loosen the surrounding rubber seal on the edge of the lid/container.
10.6 Pressure test for Lava
If the vacuum sealer fails to build enough pressure during the vacuuming pro-
cess, a pressure test can help determine which replacement part is needed. The
test can be conducted as follows:
1. Open the device’s lid.
2. Set the selector switch for bags/containers (Fig. 2, No. 7) to
.
• Does the vacuum pump start? If not, please contact customer service.
3. If yes, hold the right suction tube within the foam rubber seal with your finger.
• When the bar is completely gone, the device has reached full vacuum
pressure.
• Is an increase in pressure detected at the finger?
If the bar in the bar display does not completely disappear, please remove the lid
of the liquid separator and perform the pressure test again using the rear of the
two exposed tubes.
If insufficient vacuum pressure is also detected here, the vacuum sealer should
be sent in for repair.
Scan the QR code and watch the video tutorial on performing the Lava pres-
sure test.
Lava pressure test:
www.la-va.com/pressure-test-v.100-premium-x
Required spare parts can be obtained through the Lava online shop at www.la-
va.com, through the Lava service team, or from authorized dealers. Please have
the device type and purchase date ready (see label on the bottom of the device).
Opening the device without authorization will void the warranty.
11. Disposal of the old device
Do not dispose of the old device in regular waste and instead, take it to a col-
lection point for the return and recycling of electrical and electronic waste.
Lava GmbH & Co. KG is registered as a manufacturer of electrical and/
or electronic devices with the Stiftung Elektro-Altgeräte Register, Benno-Strauß-
Str. 1, 90763 Fürth, under the following registration number (WEEE-Reg.-Nr. DE):
DE 86929896.
Further information on disposal can be found at:
www.la-va.com/en/legal/electronic-device/
12. Technical specifications
Type
V.100 Premium X
Article No.
VL0100XP
Connection data
220 V – 240 V, 50 Hz
Power consumption Pmax
500 Watt
Dimensions (W/D/H)
410 x 230 x 98 mm
Weight
4,40 Kg
For further information and useful tips, visit www.la-va.com
Scan the QR code to directly access the practical shelf life
table.
EN
Summary of Contents for PREMIUM X V.100
Page 24: ...Notizen Notes...
