background image

LAUNCH 

  

                            

X-431 PRO3 V4.0 User Manual

 

1 Introduction 

1.1 Product Profile 

X-431 PRO3 is a powerful Android-based diagnostic tool, which has several 
production configurations ranging from commercial vehicle to passenger vehicle. 
It inherits from LAUNCH’s advanced diagnosing technology and is characterized 
by covering a wide range of vehicles, featuring powerful functions, and providing 
precise test result. 

Through the simple Bluetooth or Wi-Fi communication (only for Commercial 
Vehicle/Gasoline & Diesel Configuration) communication between VCI (Vehicle 
Communication Interface) device and the display handset, it achieves full car 
model and full system vehicle trouble diagnosis, which include Reading DTCs, 
Clearing DTCs, Reading Data Stream, Actuation Test and Special Functions. 
Moreover, taking advantage of the mobile Internet, it also integrates One-click 
Update, Remote Diagnosis, Repair Data and golo Business Manager, which 
helps to diagnose vehicle issues more efficiently, and greatly increase 
customer’s retention and boost shop revenue. 

1.2 Features 

y

  Intelligent Diagnose: This module allows you to use the VIN information of the 

currently identified vehicle to access its data (including vehicle information, 
historical diagnostic records) from the cloud server to perform quick test.   

y

  Local Diagnose: Follow the on-screen prompts to start diagnostic session 

step by step. Diagnosis functions include: Read DTCs, Clear DTCs, Read 
Data Stream, Special Functions etc. 

y

  Remote Diagnose: This option aims to help repair shops or technicians 

launch instant messaging and remote diagnosis, making the repair job getting 
fixed faster. 

y

  Reset: All kinds of common maintenance and reset items including Oil lamp 

reset, DPF regeneration, ABS bleeding etc. can be done. 

y

  One-click Update: Lets you update your diagnostic software online. 

y

 Diagnostic History: This function provides a quick access to the tested 

vehicles and users can choose to view the test report or resume from the last 
operation, without the necessity of starting from scratch. 

Summary of Contents for X-431 PRO3


































































































Reviews: