LAUNCH TECH X-431 PRO3 User Manual Download Page 89

Page: 89 / 97

LAUNCH

X-431 PRO3 V4.0 User Manual

9.13 Settings

It enables you to make some application settings and view software version
information etc.

9.13.1 Units

It is designed to configure the measurement unit. Metric System and English
System are available.

9.13.2 Shop Information

This option lets you define your print information. It mainly includes Workshop,
Address, Telephone, Fax and License Plate.

After inputting, tap “Save”.

Once you saved the print information, it will be entered automatically in the “Add
Information” box every time you save the diagnostic report.

9.13.3 Printer Set

This option is designed to establish a wireless connection between the tablet
and the Wi-Fi printer (sold separately) while performing printing operations.

Follow the steps below to connect the printer.

1. Tap “Printer Set”.

Summary of Contents for X-431 PRO3


































































































Search results

Summary of Contents for X-431 PRO3

Reviews:

Related manuals for X-431 PRO3

Brands by name

Popular brands

LAUNCH TECH X-431 PRO3, User Manual

Search results

Summary of Contents for X-431 PRO3

Reviews:

Related manuals for X-431 PRO3

Brands by name

Popular brands