LAUNCH TECH X-431 PRO3 User Manual Download Page 28

Page: 28 / 97

LAUNCH

X-431 PRO3 V4.0 User Manual

*Note: In process of download, please make sure it is properly connected to the WLAN

network. It may take several minutes to finish it, please be patient to wait.

B. If you have registered to be a member, input your name and password, and

then tap the “Login” button to enter the main menu screen directly.

Note: The tablet has an auto-save function. Once the username and password are

correctly entered, the system will automatically store it. Next time you login the system,

you will not be asked to input the account manually.

C. If you forgot the password, tap “Retrieve password” and then follow

on-screen instructions to set a new password.

4.2.2 Job menu

It mainly includes the following items:

Name

Description

Intelligent
Diagnose

This module allows you to obtain vehicle data from the
cloud server to perform quick test via reading VIN,

Summary of Contents for X-431 PRO3


































































































Search results

Summary of Contents for X-431 PRO3

Reviews:

Related manuals for X-431 PRO3

Brands by name

Popular brands

LAUNCH TECH X-431 PRO3, User Manual

Search results

Summary of Contents for X-431 PRO3

Reviews:

Related manuals for X-431 PRO3

Brands by name

Popular brands