36
LAUNCH
X-431 PAD V
User's Manual
refer to Chapter 5.5.4.
Camera: Open camera to take pictures.
5.5.4 Launch Remote Diagnosis (Device-To-Device)
The X-431 PAD V handset is allowed to initiate remote diagnosis with
other diagnostic tools (including but not limited to the X-431 PAD V) of
Launch family, which are equipped with this module.
* Notes: Before performing this operation, please make sure the following
no matter which side sends the remote request:
• Turn on the vehicle power supply.
• Throttle should be in a closed position.
• The X-431 PAD V should be properly connected to the vehicle’s DLC and a
successful communication is required.
In Fig. 5-43, tap “Remote Diagnose”, a pull-down menu including the
following options appears:
Fig. 5-44
These options are defined as follows:
Actions
Results
Request control
remote device
Request to control the partner’s device
remotely to help him diagnose the vehicle.
*Notes:
• Remote diagnosis has the same diagnostic
steps as manual diagnosis.
• In process of remote diagnosis, tap the
button to send a voice message.
• Once vehicle diagnosis is complete, a report
will be created. Input your comments on this
report, and then tap “Send Report” to send it
to the partner.
• If you have a local vehicle diagnosis in process,
please exit it first before starting remote
diagnosis.
Tap
“
Request control remote device
”
Wait for partner
’
s confirmation
Start connecting after request confirmed
Start Diagnosis
Generate diagnostic report