Transport and setup
Part 2 • Page 2-1
Part 2 – Supplementary Operating Instructions
Rev. 4.00 December 2014
Software version 1.04
EcoRO Dia I/II (HT)
Part 2 • Chapt
er 2
2.
Transport and setup
2.1
Transport
The system is delivered in a wooden crate.
•
Check the shipment for transport damage and completeness.
•
In case of any transport damage, keep the packaging and inform the shipping agent and manufacturer
immediately!
2.2
Scope of delivery
The system is packed and delivered with the following components:
•
Completely assembled system
•
These operating instructions
•
Circuit diagram
•
Instructions for operation, maintenance, dangerous areas
2.3
Transport packaging
2.4
Requirements at the place of installation
•
Horizontal industrial floor with a permissible load of at least 1500 kg/m
2
•
No shaking or vibrations
•
0.5 m free space on all sides of the system for maintenance work (with opened switch cabinet doors;
machine directives for escape route)
•
Acid-resistant floor covering
•
IP54: protect the switch cabinet from direct water jets and high levels of dust
•
The system is suitable for operation in roofed and weather-protected locations (e.g. closed rooms)
IMPORTANT Only have experienced transport specialists carry out transportation.
NOTICE
Dead weight > 200 kg
Suitable aids (such as a forklift truck) must be used for all types of transport.
The system must be protected from tipping over and from non-intended use.
Transport packaging
EcoRO Dia II HT 700 – 3600
Height
up to 1970 mm
Width
up to 950 mm
Length
up to 2000 mm
Weight inc. transport packaging
up to 1000 kg
