Lauda VC 1200, Operating Instructions Manual

Page: 73 / 112

(
____
)
4 70.00 0 10 0.1 --- off off off
5 60.00 0 30 0.0 --- off off off
6 30.00 0 0 0.0 --- off off off
A new segment with the number 3 was entered in the edited table.
The time for the segment with number 4 was also changed. The
tolerance for the segment with number 5 was adjusted.
Tab. 11: "After" table
(- - - -, edited)
No. Tend hh mm Tol Pum
p
S1 S2 S3
Start 30.00 -- -- 0.1 --- off off off
2 50.00 0 20 0.0 --- off off off
3 50.00 0 20 0.1 --- off off off
4 70.00 0 20 0.0 --- off off off
5 70.00 0 10 0.8 --- off off off
6 60.00 0 30 0.0 --- off off off
7 30.00 0 0 0.0 --- off off off
The entered tolerance can have a great influence with external
bath control. The graph on the side of the edited profile clarifies the
possible overrun of the actual temperature in the bath vessel (solid
line) for the setpoint value of the programmer (grey background).
Fig. 62: Program tolerance
Note:
Operation
Variocool 73