Lauda VC 1200, Operating Instructions Manual

Page: 25 / 112

The hoses specified below can be used for all heat
transfer liquids that are approved for the devices.
Tab. 3: Hoses
Type
Device
Pump con-
nection
Accessories
required (nipple
and screw cap are
provided on the
device as
standard)
Maximum
operating
pressure
Clear
width x
outer
diameter
in mm
Tem-
perature
range in
°C
Cata-
logue
number
EPDM hose with
fabric reinforce-
ment
VC 1200 to VC
5000 (W)
G ¾ (15),
nipple ¾"
Hose nozzle with
screw cap EOA 004
10 bar 19 x 27 -40 – 100 RKJ 032
EPDM hose with
fabric reinforce-
ment
VC 7000 to VC
10000 (W)
G 1
¼
(20),
nipple 1"
Hose nozzle with
screw cap EOA 003
10 bar 25 x 34 -40 – 100 RKJ 033
Tab. 4: Hose clips
Suitable for hose Clear width Ø in mm Catalogue number
RKJ 112, RKJ 031 12 — 22 EZS 013
RKJ 032, RKJ 033 25 — 40 EZS 016
4.2.2 Connecting external consumer
CAUTION!
Discharge of heat transfer liquid during operation
caused by open consumer
Electric shock, scalding, frostbite
 Only use hydraulically closed consumers.
CAUTION!
Bursting of the external hydraulic circuit due to
overpressure
Impact, cutting, scalding, frostbite
 Lay tubes so that they do not kink.
Before starting up
Variocool 25