6
Operation
6.1 General safety instructions
CAUTION!
Bursting of the external consumer
Scalding, frostbite
A bypass regulator is available to set the pump
pressure.
CAUTION!
Overheating beyond maximum operating tem-
perature in the event of a fault
Burns, scalding
In the event of a fault, devices with a heater may
reach temperatures of up to 100 °C.
6.2 Operating modes
Two operating modes are supported for the devices.
n
During operation, the components of the device are operated.
n
In the standby operating mode, all components of the device
are switched off. Only the screen of the device is supplied with
power. For example, this operating mode is suitable for making
extensive settings.
6.3 Menu structure overview
Menu structure for Setpoint Value,
Setup and Programmer
Operation
Variocool
46
Summary of Contents for VC 1200
