Lauda P 10, Operation Manual

Page: 125 / 160

Code English Edition Description
20 SWV VALVE 3 OLD Valve module 3 software version is too old
21 SWV VALVE 4 OLD Valve module 4 software version is too old
22 SWV PUMP 0 OLD Pump module 0 software version is too old
23 SWV PUMP 1 OLD Pump module 1 software version is too old
24 SWV PUMP 2 OLD Pump module 2 software version is too old
25 SWV PUMP 3 OLD Pump module 3 software version is too old
26 SWV HTC OLD High-temperature cooler software version is too old
27 SWV EXT PT OLD External Pt module software version is too old
28 SWV ETHERNET OLD Ethernet module software version is too old
29 SWV ETHERCAT OLD EtherCAT module software version is too old
30 SWV UNIVERSAL Universal module software version is too old
31 SWV COMMAND 1 OLD Operating system 1 (command or base) software version
is too old
32 SWV RESERVED Reserved for software version XXX is too old
33 MISSING ADAPT2
34 PRESS SWITCH2 Pressure switch KM2 has triggered
35 KLIXON2 KM2: to1 is too high, Klixon has most probably triggered
36 SMIN TOO SMALL to1 is too low in minimum position
37 VALVE NOT CLOSED Cooling valve does not close correctly during adaptation
cycle
38 CALIBRATION Faulty calibration of a temperature probe
39 VALVE CHANGED A valve was modified/replaced
40 WRONG NET FREQUENCY
41 WRONG NET VOLTAGE
42 NO PRO TYPE Invalid PRO device type
43 NO PRO VOLTAGE Invalid PRO mains voltage setting
44 KM CURRENT NOT OK Refrigerating machine frequency incorrect
45 STACK OVERFLOW CAN TaskCan: 90 % stack utilization exceeded
46 STACK OVERFLOW ADC TaskADC: 90 % stack utilization exceeded
47 STACK OVERFLOW CHECK TaskCheck: 90 % stack utilization exceeded
48 STACK OVERFLOW COOL TaskCool: 90 % stack utilization exceeded
49 STACK OVERFLOW FAN TaskFan: 90 % stack utilization exceeded
50 RTOS MISC
51 KM OFF AT SERV Refrigerating machine switched off during adapta-
tion/flushing
V6 PRO bath thermostats and circulation thermostats 125 / 156