ECO Silver
45 / 124
7.1
Switching on
–
Switch on the device with the mains switch at the front. An acous-
tic signal sounds.
1 s
–
The current bath temperature (T
int
), pump level as well as the pump
symbol, the set-point temperature T
set
and the soft-key bar at the
bottom edge of the display appear.
–
For the optimum use of the display representation, the soft-key bar
disappears if no key has been pressed for at least ten seconds. The
representation can be reactivated by pressing any key.
–
The pump starts (exception: "Standby" operating status).
–
When standby is activated (
7.4.4), the last operating values are
taken over.
–
With the key you check or change the overtemperature switch-
off point:
–
On pressing the key T
max
the value in the upper line is displayed;
–
(Setting the overtemperature switch-off point T
max
(
29.
73 °C
1
30.00 °C Tset
T
int
DISPLAY
MENU
STOP
29.
73 °C
1
30.00 °C T
set
T
int
T
max
85
°C
- - -
T MAX
- - -
29.76 °C
T
int
Summary of Contents for ECO Silver E 10 S
