Lauda ECO Silver E 10 S, Operation Manual

Page: 9 / 128

10/2019 i
ECO Silver 9 / 124
1.2 General safety
Read through the operating instructions carefully. They contain important information for working with this device. If
you have any queries, please contact our Service Department (

8.6).
Follow all the directions in these operating instructions. Only in this way is the correct procedure ensured when work-
ing with the device.
 Make sure that the device is only operated by instructed specialist personnel.

Never operate the device without heat transfer liquid.

Never operate the device,

it is damaged,

if it is leaking,

the mains cable is damaged.
 Switch off the device and withdraw the mains plug
 when carrying out service or repair work,
 when moving the device,
 when installing or removing modules or accessories
 in case of danger.

Do not make technical modifications to the device. Infringements in this respect invalidate the warranty.

Have service and repair work carried out only by specialists.

Follow the safety information in the following sections and read it through carefully.
The devices are not designed for use in medical applications in accordance with DIN EN 60601-1 and IEC 601-1!
Classification in accordance with EMC requirements
Device Immunity Emissions Class Customer power supply
Heating thermostat
ECO Silver
Type 1 in accordance with
DIN EN 61326-1
Emissions Class B
in accordance with CISPR 11
Only for EU
Domestic connection value
≥ 100 A
Heating thermostat
ECO Silver
Type 1 in accordance with
DIN EN 61326-1
Emissions Class B
in accordance with CISPR 11
Worldwide
No limitation
Device Immunity Emissions Class Customer power supply
Cooling thermostat
ECO Silver
Type 1 in accordance with
DIN EN 61326-1
Emissions Class B
in accordance with CISPR 11
Only for EU
Domestic connection value
≥ 100 A
Cooling thermostat
ECO Silver
Type 1 in accordance with
DIN EN 61326-1
Emissions Class B
in accordance with CISPR 11
Worldwide
No limitation