Lauda ECO Silver E 10 S, Operation Manual

Page: 84 / 128

84 / 124
ECO Silver 10/2019 i
–
Access to the main menu level is obtained by pressing the enter
key .
–
Selection and confirmation of

Setup

Basic setup

Curr.Consumpt. .
The entry window appears.
–
Change the value with or .
–
Single figures can be selected by pressing or .
–
Confirm the input with the enter key .
–
By pressing (ESC) you are returned to the menu level without any change.
Deviations to the calibrated reference thermometers (e.g. LAUDA DigiCal) can be corrected internally by the "Off-
set" function.
–
You activate the soft-key bar by pressing any key.
–
Access to the main menu level is obtained by pressing the enter
key .
–
Selection and confirmation of

Setup

Calibration .
The adjacent menu window appears.
–
Select Calibration with or and confirm with .
The entry window appears. The value indicated on the reference ther-
mometer must be entered as the value.
–
Change the value with or .
–
Single figures can be selected by pressing or .
–
By pressing (+/-) the arithmetic sign can be changed.
–
You confirm the set value by pressing .
–
By pressing (ESC) you are returned to the menu level without any change.
Curr.Cons.
Min: 8.00
Max: 16.00
ESC

OK - - -
16.00
Temp. ref. device
Min: -22.02Max: 28.02
ESC

OK + / -
25.02
ESC

OK STOP
Calibration
Factory calibration
A . 7 Entering the offset of the displayed temperature (calibration)