8. INFORMATION
Error No. Causes and Actions
Contact the store from whom you bought the
unit.
Make sure that another time card is not jamming
in the time recorder and the ribbon cassette is
correctly installed in place.
After making sure of the above, attach the cover.
Contact the store from whom you bought the
unit.
Make sure that another time card is not jamming
in the time recorder and the ribbon cassette is
correctly installed in place.
After making sure of the above, attach the cover.
In case the time card is completely stuck in the
unit and does not come out, remove the cover.
Then, using another time card, push the stuck
time card downwards, and take it off from the
bottom of the unit.
Input the correct password you set. (4-digit
numbers)
Correctly set the starting date and ending date of
the daylight saving time.
Check the setting contents and input the correct
figures.
CPU Error
The remaining life of lithium battery for
memory back-up is short.
The card is not pulled in properly.
Card sensor error
RAM error
Clock does not work.
Printing cannot be performed.
The printer motor or sensor is not normal.
Inserted time card is wrong type.
The time card is stuck in the time recorder.
Password error
The starting date and the ending date of the
daylight saving time are the same date.
Input the wrong settings.
E-00
E-01
E-05
E-15
E-10
E-12
E-30
E-38
E-35
E-40
E-41
E-49
No.
Error causes
Action
Note
:
- If the error number is still displayed after checking above points, contact the store from whom
you bought the unit.
- When you finish instructed action, press [SETTING] button for three seconds to be back to
normal punching mode.
30
Summary of Contents for 700E
Page 1: ......
