7. OTHERS
Setting / Changing the Passcode
Below image shows an example that "1234" is set as passcode.
Inputting the Passcode
While display shows "9999", press [+] or [-] button to select a number for the first digit
of your password, and press [SET] button to accept.
Select the 2nd, the 3rd, and the 4th digits in the same manner.
When correct password is input, you can enter setting mode and change settings.
Remove the cover, and press [SETTING] button to enter setting mode.
Press the passcode buttons ([1] and [2]) at the same time for three seconds.
Note:
In case that you've already set a passcode, "9999" appears on display. You need
to input the current passcode first to change the passcode. (No passcode is set by
default.)
Select a number for the first digit of your passcode using [+] or [-] button, and press
[SET] button to accept.
Note
:
- "0000" and "9999" are not valid as your passcode.
- When you set "0000", passcode will be cancelled.
Select the 2nd, the 3rd, and the 4th digits in the same manner.
Press [SETTING] button to exit setting mode, and attach the cover.
4th digit
1st digit
2nd digit
3rd digit
Once the passcode is set, you are requested to input the current passcode
before changing any setting. If the passcode you entered does not coincide
with the current passcode, you cannot change the setting values.
25
Summary of Contents for 700E
Page 1: ......
