background image

1

EN

Multi-Channel IN-OUT Thermo-Hygrometer

with Cable Free Sensor and RF Clock

MODEL: RMR132HG

USER MANUAL

INTRODUCTION

Congratulations on your purchase of the RMR132HG
Multi-Channel In-Out Thermo-Hygrometer with 433MHz cable
free sensor and radio-controlled calendar clock.

The basic package comes with a main unit, which is the
temperature and calendar clock station, and a remote unit, the
Thermo-Hygrometer sensor.

The main unit has large read-outs for indoors temperature and
humidity, calendar clock, temperatures and relative humidity
collected and transmitted by the remote unit. The main unit can
support up to 

3

 remote units.

The main unit is capable of keeping track of the maximum and
minimum recordings of different sites. And no wire installation is
required and the RMR132HG operates at 433MHz.

As for the calendar clock, it is radio-controlled. It automatically
synchronizes its current time and date when it is brought within an
approximate 1500km radius of the radio signal generated from
Frankfurt, Germany (DCF77).

You can also set the calendar clock manually when it is off range.
Other features include 

4

-language display, 

4

-step crescendo dual

alarms and interchangeable display modes.

MAIN FEATURES

D

B

A

E

C

G

H

I

F

O

P

S

L

N

M

K

J

R

Q

RMR132HG_M_EN_R01

8/13/04, 12:30 PM

1

Summary of Contents for RMR132HG
















Reviews: