LT-3100S GMDSS User & Installation Manual Rev. 1.02
User Interface (UI)
Lars Thrane A/S
www.thrane.eu
Page 37 of 71
Additional user information is available in the system and represented as a system text or as an icon in the
status bar. Table 17 is listing the system text and describing the status of the LT-3100S GMDSS system.
System Text
Description
System Status
Initializing, please wait…
The LT-3100S GMDSS system is starting up. Please
wait until the system text is updated.
Not ready
Searching for Iridium…
The LT-3100S GMDSS system is searching for the
Iridium satellites signal. Make sure that the LT-
3130 Antenna Unit has free line of sight to the
Iridium® satellites.
Not ready
Registering…
The LT-3100S GMDSS system is registering onto the
Iridium® Network.
Not ready
Registered
The LT-3100S GMDSS system is registered on the
Iridium® Network.
Ready to use
Antenna not connected
The LT-3110S Control Unit and LT-3130 Antenna
Unit is not connected via the coaxial cable. Verify
coaxial cable connections, specifications, and
details in
on page 26.
Not ready
Handset not connected
The LT-3120 Handset is not connected to the LT-
3110S Control Unit. Phone calls cannot be
performed from the LT-3120 Handset.
(Not ready)
SIM card missing
The LT-3110S Control Unit cannot identify a SIM
card in the SIM slot. Check that a SIM card has
been inserted behind the rubber dust cover on the
back side of the control unit. For further details,
see
on page 23.
Not ready
SIM card locked
The SIM lock has been enabled by the user (or SIM
lock is default enabled in the SIM card). Type in the
SIM card PIN code. The SIM lock can be disabled by
the user from the UI display (Menu -> System ->
Security).
Not ready
SIM card blocked
The SIM card PIN code has been typed in incorrect
three consecutive times. Type in the SIM card PUK
code to deactivate the SIM card blocked mode.
Not ready
SIM card error
The SIM card error might appear, if the SIM card is
detected, but the SIM card format or data is
wrong. Please power down the LT-3110S Control
Unit, verify correct SIM card re-insert, and re-
power the system again.
Not ready
Table 17: LT-3110S Control Unit
–
System Text
