LT-3100S GMDSS User & Installation Manual Rev. 1.02
Installation and Mounting
Lars Thrane A/S
www.thrane.eu
Page 15 of 71
LT-3140S Interface Unit
The LT-3140S Interface Unit is designed for indoor mounting and is connected directly to the LT-3110S
Control Unit via an Ethernet cable. The LT-3140S Interface Unit specifications are available in
on page 58.
The LT-3140S Interface Unit without front cover is illustrated in Figure 30 on page 28.
The LT-3140S Interface Unit front cover can be removed by pushing on both sides of the front cover,
marked with the text ‘Open’ and press the front cover upwards (
hold tight to the backplate, if the unit is
not mounted).
Once, the LT-3140S Interface Unit front cover has been removed, the LT-3140S Interface Unit can be flush
mounted on a surface. Use all four screw holes (every corner) of the backplate, to fasten the unit
sufficiently.
The LT-3140S Interface Unit interfaces are described in
on page 28.
Figure 15: LT-3140S Interface Unit (without front cover).
