LT-4200 User & Installation Manual Rev. 1.00
Web server
Lars Thrane A/S
www.thrane.eu
Page 86 of 128
Static
The Static mode must be used when the IP address of the LT-4210 Control Unit must never change.
Typically used, if connecting the LT-4210 Control Unit to an IP network, where a DHCP server is already
available, and where it is important that the IP address assigned for the LT-4210 Control Unit is never
changed. The web server static setting is illustrated in Figure 101.
DNS
The LT-4200 system contains a caching recursive DNS server used to resolve names in the local domain. The
system also contains two references to external DNS servers which are used to resolve names in the other
domains. For configuration of the DNS servers see Figure 102.
NOTE:
If the outgoing firewall is enabled the LT-4200 system will only allow domain names
present in any firewall rules to be resolved externally. See Outgoing Firewall later in this
section.
Figure 101: Web server
–
Network (Static mode)
Summary of Contents for Iridium Certus 200
Page 2: ......
Page 140: ......
Page 141: ...Lars Thrane A S Skovlytoften 33 2840 Holte Denmark www thrane eu...
