5: Configuration Using Web-Manager
UDS1100 User Guide
32
Connect Mode: Active Connection
Active Connect
Select
None
(default)
to disable
Active Connect
. Otherwise,
indicate the connection type from the drop-down list:
With Any Character:
Attempts to connect when any
character is received from the serial port.
With Active Mdm Ctrl In
: Accepts external connection
requests only when the Modem Control In input is asserted.
With Start Character:
Attempts to connect when it receives
a specific start character from the serial port. The default
start character is carriage return.
Manual Connection:
Attempts to connect when directed by
a command string received from the serial port.
Auto Start:
Automatically connects to the remote IP
address and port after booting up.
Start Character
If Active Connect is set to
With Start Character
, enter the
start character in this field. The default setting is
0D
.
Modem Mode
Indicates the on-screen response type when in Modem Mode
(if
Modem Mode
is enabled). The default setting is
None
.
Show IP Address After
RING
Indicates whether to display the remote IP address upon
connection. The default setting is
Yes
.
Endpoint Configuration
Local Port
Enter the local port number.
Auto increment for
active connect
Select to auto-increment the local port number for new
outgoing connections. The range of auto-incremented port
numbers is
50,000
to
59,999
and loops back to the beginning
when the maximum range is reached. Disabled by default.
Remote Port
Enter the remote port number.
Remote Host
Enter the IP address of the remote device.
Common Options
Telnet Com Port Cntrl
This field is available for configuration only when
Active
Connect
is set to
None
. Select
Enable
to permit Telnet
communication to the UDS1100 unit. The
Telnet Com Port
Cntrl
feature is used in conjunction with the Com Port
Redirector (CPR) utility. (See the CPR online Help for details.)
Terminal Name
This field is available for configuration only when
Telnet Com
Port Cntrl i
s set to
Enable
.
Use the terminal name for the Telnet terminal type. Enter only
one name. When this option is enabled, the unit also reacts to
the end of record (EOR) and binary options, which can be
used for applications such as terminal emulation to IBM hosts.
Connect Response
A single character is transmitted to the serial port when there
is a change in connection state. The default setting is
None
.
