9: Setup Mode: Advanced Settings
UDS1100 User Guide
57
Security Settings (Option 6)
You can change security settings by means of Telnet or serial connections only, not on
the Web-Manager.
We recommend that you set security over the dedicated network or
over the serial setup to prevent eavesdropping.
Caution:
Disabling both Telnet Setup and Port 77FE will prevent users from
accessing the setup menu from the network. Disabling Port 77FE also
disables the Web from configuring the device.
Select
6
to configure security settings.
Figure 9-2. Security Settings
Disable SNMP <N> ?
SNMP Community Name <public>:
Disable Telnet Setup <N> ?
Disable TFTP Firmware Update <N> ?
Disable Port 77FEh <N>
Disable Web Server <N> ?
Disable Web Setup <N> ?
Disable ECHO ports <Y> ?
Enable Enhanced Password <N> ?
Disable SNMP
This setting allows you to disable the SNMP protocol on the unit for security reasons. The
default setting is
N
(No).
Disable SNMP (N) ? _
SNMP Community Name
The SNMP Community Name is a required field for NMS to read or write to a device.
Enter a string of
1
to
13
characters. The default setting is
public
.
SNMP Community Name (public): _
The default entry is
public
. The current value is displayed in parentheses.
Disable Telnet Setup
Note:
If you choose to disable this option, keep in mind that disabling both Telnet
Setup and Port 77FE will prevent users from accessing the setup menu from the
network.
