9: Setup Mode: Advanced Settings
UDS1100 User Guide
58
This setting defaults to the
N
(No) option. The
Y
(Yes) option disables access to Setup
Mode by Telnet (port 9999). It only allows access locally using the web pages and the
serial port of the unit.
Disable Telnet Setup (N) ? _
Disable TFTP Firmware Update
This setting defaults to the
N
(No) option. The
Y
(Yes) option disables the use of TFTP to
perform network firmware upgrades. With this option, you can download firmware
upgrades over the serial port using DeviceInstaller’s Recover Firmware procedure. (See
10: Firmware Upgrades
.)
Disable TFTP Firmware Update (N) : _
Disable Port 77FE (Hex)
Note:
If you choose to disable this option, keep in mind that disabling both Telnet
Setup and Port 77FE will prevent users from accessing the setup menu from the
network.
Port 77FE is a setting that allows DeviceInstaller, Web-Manager, and custom programs
to configure the unit remotely. You may wish to disable this capability for security
purposes.
Disable Port 77FEh (N) ? _
The default setting is the
N
(No) option, which enables remote configuration. You can
configure the unit by using DeviceInstaller, web pages, Telnet, or serial configuration.
The
Y
(Yes) option disables remote configuration and web sites.
Disable Web Server
This setting defaults to the
N
(No)
option
. The
Y
(Yes) option disables the web server.
Disable Web Server (N) ? _
Disable Web Setup
The
Y
(Yes) option disables configuration using the Web-Manager. This setting defaults
to the
N
(No)
option
.
Disable Web Setup (N) ? _
Disable ECHO Ports
This setting controls whether port 7 echoes characters it receives. The default setting is
Y
(Yes), which disables ECHO ports.
Disable ECHO ports (Y) ? _
