5: Configuration Using Web-Manager
UDS1100 User Guide
27
Server Configuration
Enhanced Password
Select whether to enable advanced password:
Enable:
selecting this option enables advanced
password creation, allowing you to create passwords up
to 16 bytes in length.
Disable:
selecting this option disables advanced
password creation, allowing you to create basic
passwords up to 4 bytes in length.
Telnet/Web Manager
Password
Enter the password required for Telnet configuration and Web
Manager access.
Retype Password
Re-enter the password required for Telnet configuration and
Web Manager access.
Advanced
ARP Cache Timeout
(secs)
When the unit communicates with another device on the
network, it adds an entry into its ARP table. ARP Cache
timeout defines the number of seconds (1-600) before it
refreshes this table.
TCP Keepalive (secs)
TCP Keepalive time defines how many seconds the unit waits
during an inactive connection before checking its status. If the
unit does not receive a response, it drops that connection.
Enter a value between
0
and
60
seconds.
0
disables
keepalive. The default setting is
45
.
Monitor Mode @ Bootup
Select
Disable
to disable entry into the monitor mode using
the
yyy
or
xx1
key sequence at startup. This field prevents
the unit from entering monitor mode by interpreting the stream
of characters that are received during the device server's
initialization at startup. The default setting is
Enable.
HTTP Server Port
This option allows the configuration of the web server port
number. The valid range is
1-65535
. The default setting is
80
.
Config Server Port
Not applicable for this product.
MTU Size
The Maximum Transmission Unit (MTU) is the largest physical
packet size a network can transmit for TCP and UDP. Enter
between
512
and
1400
bytes. The default setting is
1400
bytes.
TCP Re-transmission
timeout (ms)
The desired TCP re-transmission timeout value. If the ACK is
not received for a packet sent from the UDS device, then the
unit will retransmit the data. The valid range is 500-4000
msec.
3. When you are finished, click the
OK
button.
4. On the main menu, click
Apply Settings
.
Host List Configuration
The UDS1100 scrolls through the host list until it connects to a device listed in the host
list table. After a successful connection, the unit stops trying to connect to any others. If
this connection fails, the unit continues to scroll through the table until the next successful
connection.
