Lantronix SLC8, User Manual

Page: 74 / 351

7: Services
SLC™ Console Manager User Guide 74
V3 Read-Only User
V3 Read-Write User
3. To save, click the Apply button.
SNMP, SSH, Telnet, and Logging Commands
The following CLI commands correspond to the web page entries described above.
To configure services (system logging, SSH and Telnet access, SSH and Telnet timeout,
SNMP agent, email (SMTP) server, and audit log):
set services <one or more services parameters>
Parameters:
alarmdelay <1-6000 Seconds>
auditlog <enable| disable >
auditsize <Size in Kbytes>
Range is 1-500 Kbytes.
authlog <off|error|warning|info|debug>
clicommands <enable| disable >
contact <Admin contact info>
devlog <off|error|warning|info|debug>
diaglog <off|error|warning|info|debug>
genlog <off|error|warning|info|debug>
includesyslog <enable| disable >
location <Physical Location>
netlog <off|error|warning|info|debug>
nms1 <IP Address or Name>
nms2 <IP Address or Name>
phonehome < enable |disable>
phoneip <IP Address>
portssh <TCP Port>
rocommunity <Read-Only Community Name>
rwcommunity <Read-Write Community Name>
User Name SNMP v3 is secure and requires user-based authorization to access SLC MIB objects.
Enter a user ID. The default is
snmpuser . Up to 20 characters.
Password/Retype
Password Password for a user with read-only authority to use to access SNMP v3. The default is
SNMPPASS . Up to 20 characters.
Passphrase/
Retype
Passphrase Passphrase associated with the password for a user with read-only authority. Up to 20
characters.
User Name SNMP v3 is secure and requires user-based authorization to access SLC MIB objects.
Enter a user ID for users with read-write authority. The default is
snmprwuser . Up to
20 characters.
Password/
Retype Password Password for the user with read-write authority to use to access SNMP v3. The default
is
SNMPRWPASS . Up to 20 characters.
Passphrase/
Retype
Passphrase Passphrase associated with the password for a user with read-write authority. Up to 20
characters.