14: Application Examples
SLC™ Console Manager User Guide
247
Dial-in (Text Mode) to a Remote Device
The example in
shows a modem connected to the SLC console manager device port
1, and a SUN server connected to the SLC device port 2. You can configure the modem for text
mode dial-in, so a remote user can dial into the modem using a terminal emulation program and
access the SUN server. HyperTerminal™ which comes with the Microsoft ® Windows™ operating
system, is an example of a terminal emulation program.
Figure 14-3 Connection to SUN UNIX Server
In this example, the system administrator performs the following steps.
1.
Configure the device port that the modem is connected to for dial-in by using the set
deviceport command with the shown parameters.
2.
Configure the device port that is connected to the console port of the SUN UNIX server by
using the
baud
and
flowcontrol
parameters.
3.
Dial into the SLC console manager via the modem using a terminal emulation program on a
remote PC. A command line prompt displays.
[SLC]> set deviceport port 1 modemmode text
Device Port settings successfully updated.
[SLC]> set deviceport port 1 initscript "AT&F&K3&C1&D2%C0A"
Device Port settings successfully updated.
[SLC]> set deviceport port 1 auth pap
Device Port settings successfully updated.
[SLC]> set deviceport port 1 localsecret "password"
Device Port settings successfully updated.
[SLC]> set deviceport port 1 modemstate dialin
Device Port settings successfully updated.
[SLC]>
[SLC]> set deviceport port 2 baud 57600 flowcontrol none
Device Port settings successfully updated.
SUN UNIX Server
Summary of Contents for SLC8
Page 1: ...Part Number 900 449 Revision J July 2014 SLC Console Manager User Guide SLC8 SLC16 SLC32 SLC48...
Page 95: ...8 Device Ports SLC Console Manager User Guide 95 Figure 8 4 Device Ports Settings...
Page 217: ...13 Maintenance SLC Console Manager User Guide 217 Figure 13 1 Maintenance Firmware Config...
