10: USB Port
SLC™ Console Manager User Guide
154
IP Settings
4.
Click
Apply
.
Restart Delay
The number of seconds after the timeout and before the SLC console manager
attempts another connection. The default is
30
seconds.
CBCP Server Allow
No Callback
For CBCP Server state, allows "No Callback" as an option in the CBCP
handshake in addition to User-defined Number and Admin-defined Number.
CBCP Client Type
For CBCP Client, this selects the number that the client would like to use for
callback - either a user-defined number passed to the server (specified by the
Fixed Dial-back Number) or an administrator-defined number determined by
the server based on the login that is PAP or CHAP authenticated.
Service
The available connection services for this modem port (Telnet, SSH, or TCP).
Only one can be active at a time. The default is None.
Telnet Port
Telnet Port Telnet session port number to use if you selected Telnet.
Defaults:
USB Port U1:
2049
USB Port U2:
2050
Range:
1025-65535
SSH Port
The SSH session port number to use if you selected SSH.
Defaults:
USB Port U1:
3049
USB Port U2:
3050
Range:
1025-65535
TCP Port
The TCP (raw) session port number to use if you selected TCP.
Defaults:
USB Port U1:
4049
USB Port U2:
4050
Range:
1025-65535
Authenticate
(checkbox)
If selected, the SLC unit requires user authentication before granting access to
the port.
Authenticate
is selected by default for
Telnet Port
and
SSH Port
, but
not for
TCP Port
.
Summary of Contents for SLC8
Page 1: ...Part Number 900 449 Revision J July 2014 SLC Console Manager User Guide SLC8 SLC16 SLC32 SLC48...
Page 95: ...8 Device Ports SLC Console Manager User Guide 95 Figure 8 4 Device Ports Settings...
Page 217: ...13 Maintenance SLC Console Manager User Guide 217 Figure 13 1 Maintenance Firmware Config...
