13: Maintenance
SLC™ Console Manager User Guide
239
Events
On this
page, you can define what action you want to take for events that
may occur in the SLC console manager.
1.
Click the
Maintenance
tab and select the
Events
option. The following page displays:
Figure 13-13 Maintenance > Events
2.
Enter the following:
Event Trigger
From the drop-down list, select the type of incident that triggers an event. Currently,
the options are:
Receive Trap
Temperature Over/Under Limit (for Sensorsoft devices)
Humidity Over/Under Limit (for Sensorsoft devices)
Device Port Data Drop
Curent Over Threshold
Note:
Certain event triggers are available on some SLC and SLB models.
Action
From the drop-down list, select the action taken because of the trigger. For
example, the action can be writing an entry into the syslog with details of the event
or sending the trap(s) to the Ethernet or modem connection.
Ethernet
For actions that require an Ethernet connection (for example,
Forward All Traps to
Ethernet
), select the Ethernet port to use.
Summary of Contents for SLC8
Page 1: ...Part Number 900 449 Revision J July 2014 SLC Console Manager User Guide SLC8 SLC16 SLC32 SLC48...
Page 95: ...8 Device Ports SLC Console Manager User Guide 95 Figure 8 4 Device Ports Settings...
Page 217: ...13 Maintenance SLC Console Manager User Guide 217 Figure 13 1 Maintenance Firmware Config...
