3: Operations
1. At the command prompt, type
set option more
, followed by
enabled
or
disabled
and press
Enter
.
Setting the temperature scale
The Set Option TempScale command sets the temperature scale that the SLP will
report in.
To set the temperature scale:
1. At the command prompt, type
set option tempscale
, followed by
Celsius
or
Fahrenheit
and press
Enter
.
Displaying system options
The Show Option command displays all system option information.
To display system option information:
2. At the command prompt, type
show options
and press
Enter
.
Example
SLP: show options
System Options
Display
Orientation: NORMAL
Strong
Passwords:
DISABLED
Configuration Reset Button:
ENABLED
More Prompt:
ENABLED
Temperature Scale:
CELSIUS
Creating a descriptive unit name
The Set Unit Name command assigns a descriptive name to a unit. This descriptive
name is displayed when the Show Traps command is issued. See
Displaying trap
configuration information
on page
76
for more information on the Show Traps
command.
To create a unit name:
3. At the command prompt, type
set unit name
, followed by the absolute unit
name, then the descriptive name of up to 24 alphanumeric and other typeable
characters (ASCII 33 to 126 decimal - spaces are not allowed).
4. Press
Enter
.
Examples
The following command adds the descriptive name Florida_HQ_1 to unit.a:
SLP: set unit name .a Florida_HQ_1<Enter>
Displaying unit information
The Show Units command displays information about the unit. This information
includes the absolute and descriptive unit names.
To display unit information:
SecureLinx SLP Remote Power Manager
55
