3: Operations
used to display current data and allow changes to outlet states or system
configuration.
Figure 3-1. Web Browser Interface
The following sections describe each interface section/page and their use.
Logging In
Logging in via a web browser requires directing the web client to the configured IP
address of the unit.
To log in by web browser:
1. In the login window, enter a valid username and password and press
OK
.
(Default username/password:
sysadmin/PASS
).
If you enter an invalid username or password, the prompt will repeat again.
You are given three attempts to enter a valid username and password
combination. If all three fail, the session ends and a protected page will be
displayed.
Outlet Control
The
Outlet Control
section offers access to the
Individual
and
Group
outlet control
pages. From the
Individual
and
Group
pages, the user can review and manipulate
power control functions for all outlets and groups assigned to the current user. Both
pages include the outlets absolute and descriptive names, the Outlet Status reported
to the unit by the outlet, the current Control State being applied by the unit and the
outlet load in amperes.
SecureLinx SLP Remote Power Manager
15