Lantronix SecureLinx User Manual Download Page 23

Page: 23 / 109

3: Operations

2. On the subsequent

Serial Port Edit

page, enter the descriptive name. Up to 24

alphanumeric and other typeable characters (ASCII 33 to 126 decimal, spaces
and colon characters are not allowed) are allowed. Press

Apply

Note:

Port names ‘1’ thru ‘64’ and ‘CONSOLE’ are reserved system names

and may not be used.

Enabling or disabling serial port active signal checking:

1. Click on the

Edit

link in the Action column next to the port to be configured.

2. On the subsequent

Serial Port Edit

page, select On or Off from the DSR Check

drop-down menu and press

Apply

Outlets

The

Outlets

configuration

page is used for assignment and/or editing of outlet

descriptive names and wakeup states.

Setting the outlet sequencing interval:

1. Enter the sequencing interval (in seconds) in the Sequencing Interval field and

press

Apply

Setting the outlet reboot delay:

2. Enter the reboot interval (in seconds) in the Reboot Delay field and press

Apply

Editing the outlet descriptive name:

1. Click on the

Edit

link in the Action column next to the outlet to be configured.

2. On the subsequent

Outlet

Edit

page, enter the descriptive name. Up to 24

alphanumeric and other typeable characters (ASCII 33 to 126 decimal, spaces
and colon characters are not allowed) are allowed. Press

Apply

Changing the outlet wakeup state:

1. Click on the

Edit

link in the Action column next to the outlet to be configured.

2. On the subsequent

Outlet Edit

page, select On, Off, or Last from the Wakeup

State drop-down menu and press

Apply

Setting the outlet Post-On delay:

3. Click on the

Edit

link in the Action column next to the outlet to be configured.

4. On the subsequent

Outlet Edit

page, enter the outlet Post-On delay (in seconds)

in the Post-On Delay field and press

Apply

Groups

The Groups configuration page is used for creation and deletion of group and
assignment of outlets to groups.

Creating a group:

SecureLinx SLP Remote Power Manager

Summary of Contents for SecureLinx














































































































Search results

Summary of Contents for SecureLinx

Reviews:

Related manuals for SecureLinx

Brands by name

Popular brands

Lantronix SecureLinx, User Manual

Search results

Summary of Contents for SecureLinx

Reviews:

Related manuals for SecureLinx

Brands by name

Popular brands