Telnet Login Method
Standard Telnet connections are not encrypted and pose a security risk. Incoming Telnet
and SSH (Secure Shell) are enabled by default to allow TCP/IP connections.
To form a Telnet connection to the SCS:
1. Enter the Telnet command followed by the SCS's IP address, a space, and 7000.
2. Enter the login password. The default login password is
access
. Until authentication
is configured and users are added, any username works.
Forming a Telnet Connection
%telnet 192.0.1.88 7000
#access (not echoed)
Lantronix SCS Version n.n/n (yymmdd)
Type Help at the ‘Local>’ prompt for
assistance.
Enter Username>
Command Line Method
To monitor or configure the SCS via a terminal, attach a terminal to the serial port (port)
and press
Enter
. You will see a
Local>
prompt at which you can enter configuration
commands. See the
SCS Reference Manual
for a complete list of available commands.
Note:
For overall help, type and enter Help in a command line. For information regarding
a specific command, type and enter Help <command>. For information regarding a
command you do not fully know, type and enter the partial command followed by a
question mark as follows: Help <xxx?>.
3-1