SCS1600/3200 User Guide
4: Application Setup
Remote User Dial-Up
Dial-up access to the SCS can be accomplished either using a data-link protocol,
typically PPP, or using an ASCII-based terminal connection with a terminal emulation
application such as HyperTerminal.
Connectivity to the SCS from a remote location requires that you create a user account,
connect and configure a modem, enable authentication, and specify an IP address range
for use during remote sessions.
To configure your SCS for remote user dial-up:
1. Create a user account.
a) From the Quick Setup column on the left, select
Users
.
b) Enter the user name and click
Create
.
c) Click
the
Configure
link next to the user name.
d) Enter a password in the
Password
field.
e) For a PPP connection, type
set PPP
in the
Login Command
field.
f) For a terminal emulation connection to the console menu, enter menu in the
Login Command
field.
g) For a terminal emulation connection to the local SCS prompt, leave the
Login
Command
field blank.
h) Click
the
Update
button.
Creating a User Account
2. Follow these steps:
a) Click
the
Modem
link.
b) Click
the
Configure
link for the port with the attached modem.
c) Select the modem type from the drop-down list.
4-7
