Lantronix
ION219-x Install Guide
33412 Rev. D
4
Warnings
Warning
: Use of controls, adjustments, or the performance of procedures other than those specified herein may result in
hazardous radiation exposure.
Warning
: Visible and invisible laser radiation when open.
Do not
look into the beam or view the beam directly with optical
instruments. Failure to observe this warning could result in an eye injury or blindness.
Warning
: DO NOT connect the power supply module to external power before installing it into the chassis. Failure to
observe this warning could result in an electrical shock or death.
Warning
: Select mounting bracket locations on the chassis that will keep the chassis balanced when mounted in the rack.
Failure to observe this warning could allow the chassis to fall, resulting in equipment damage and/or possible injury to
persons.
Warning
: Do not work on the chassis, connect, or disconnect cables during a storm with lightning. Failure to observe this warning
could result in an electrical shock or death.
See
on page
for Electrical Safety Warnings translated into multiple languages.
FCC warning
This equipment has been tested and found to comply with the limits for class A devices, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
commercial installation. This equipment generates, uses, and radiates radio frequency energy; therefore, if not
installed and used in accordance with the instructions in this document, the device could cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference; all customers will be required to correct the interference problem at their expense.
