Lantronix EMG Series, User Manual

Page: 54 / 482

4: EMG 7500 Installation
EMG™ Edge Management Gateway User Guide 54
- For information about Lantronix adapters, see Appendix C: Adapters and Pinouts .

An available connection to your Ethernet network and an Ethernet cable CAT5E or better
cables are recommended for 1000 Base Ethernet.

An AC power outlet to power the unit using the included AC (90W, 100-240V, 50/60 Hz) power
supply.

If the LTE cellular modem is installed, a network SIM card (and data services) from a service
provider
Hardware Specifications
Table 4-2 EMG 7500 Technical Specifications
Component Description
Serial Interface (Device)

Up to 8 RJ45-type 8-conductor connectors

Two 4 port RJ45 I/O modules can be installed, one on the front and one
on the back of the unit.

These connectors have individually configurable standard and reversible
pinouts. 4 ports per I/O module.

Speed software selectable (300 to 921600 baud)
Note: Serial RJ45 device ports are reversed by default.
USB 2.0 Interface
(Device)

Up to 8 USB type A (Host) connectors

Two 4 port USB I/O modules can be installed, one on the front and one
on the back of the unit.

HS, FS, and LS

Capable of providing VBUS 5V up to 100 mA per port, but not to exceed 400
mA total per 4 port USB I/O module.

May be used with a USB-to-serial adapter to connect a serial device, if
needed. Please contact Lantronix for the list of tested adapters.
Caution: USB ports are designed for data traffic only. They are not
designed for charging or powering devices. Over-current conditions on
VBUS 5V may disrupt operations.
Serial Interface (Console)

(1) RJ45-type 8-pin connector (DTE)

Speed software selectable (300 to 921600 baud)

LEDs:

Green light ON indicates data transmission activity

Yellow light ON indicates data receiving activity
Network Interface

(2) 10/100/1000 Base-T RJ45 Ethernet with LED indicators:

Green light ON indicates a link at 1000 Base-T.

Green light OFF indicates a link at other speeds or no link.

Yellow light ON indicates a link is established.

Yellow light blinking indicates activity.
Connectivity Modules

One internal LTE/4G cellular modem

One Wi-Fi module or one dialup modem (optional configuration)
Power

Input: 9-30 VDC (standard)

External AC (90W, 100-240V, 50/60 Hz) 12VDC power supply shipped with
unit
Dimensions
(L x W x H)
163mm [6.4in] x 145mm [5.7in] x 43mm [1.7in], 1U
Weight 2.5 lbs