Lantronix EMG Series User Manual Download

Page: 25 / 482

2: Introduction

EMG™ Edge Management Gateway User Guide

house a connectivity module.



Modular design

EMG 8500 offers two user swappable I/O modules (front only) and two user swappable

connectivity modules (back only).

EMG 7500 offers one I/O module (front) and one I/O or connectivity module (back).

Modules are pre-installed and cannot be replaced by the user. Different EMG part

numbers are available for the different configurations.



Data logging, device port buffering, network performance monitoring, system event logs and

console event notification via email



Integrated automatic fail-over/fail-back mechanism for seamless connection to IT equipment



Sun Break Safe compatible



Remote power manager (RPM) control of UPS and PDU devices



Scripting to automate tasks performed on the CLI or on device ports

Performance Monitoring



Performance Monitoring probes to analyze network performance

Security



Enterprise-grade security and secure user access control with local or remote authentication

Power



An external Universal AC (90W, 100-240V, 50/60 Hz) power supply provides power to the unit

DC power port. The DC power port supports 9 to 30Vdc.



Convection cooled, silent operation, low power consumption

Integration with Lantronix ConsoleFlow

™



Compatible with Lantronix ConsoleFlow™management software for an end-to-end Out-of-

Band (OOB) management solution.

Applications

The EMG is suitable for remote and secure management of the following types of IT equipment:



Servers:

Unix, Linux, Windows, and others.



Networking equipment:

Routers, switches, storage networking.



Telecom:

PBX, voice switches.



Other systems with serial interfaces:

Heating/cooling systems, security/building access

systems, uninterruptible power supply (UPS), medical devices.

Summary of Contents for EMG Series



































































































































































































































































































































































































































































































Search results

Summary of Contents for EMG Series

Reviews:

Related manuals for EMG Series

Brands by name

Popular brands

Lantronix EMG Series, User Manual

Search results

Summary of Contents for EMG Series

Reviews:

Related manuals for EMG Series

Brands by name

Popular brands