10: Device Ports
EMG™ Edge Management Gateway User Guide
199
Figure 10-7 Device Ports - Power Management
3. Enter the following:
Power Management
Sequence
A series of one to ten characters that will display the Power Management menu
when connected to the device port. The default value is
Esc+P
(escape key, then
uppercase "P"). This value is specified as
\x1bP
, which is hexadecimal (
\x
)
character 27 (
1B
) followed by a
P
.
See
for notes on key sequence precedence and
behavior.
RPM
For each managed power supply, select a RPM, most likely a PDU, which has
outlets that can be individually controlled, and which provides power to the device
connected to the device port.
See
Chapter 11: Remote Power Managers
for details on managing Remote Power
Managers with EMG.
Summary of Contents for EMG Series
Page 100: ...7 Networking EMG Edge Management Gateway User Guide 100 Figure 7 5 Network Wireless Settings...
Page 353: ...15 Maintenance EMG Edge Management Gateway User Guide 353 Figure 15 12 About EMG...
Page 474: ...EMG Edge Management Gateway User Guide 474 Figure E 3 EU Declaration of Conformity...
Page 475: ...EMG Edge Management Gateway User Guide 475 Figure E 4 EU Declaration of Conformity continued...
