Lantronix EMG Series User Manual Download

Page: 239 / 482

11: Remote Power Managers

EMG™ Edge Management Gateway User Guide

239

Figure 11-8 RPMs - Manage Device

3. Enter the following:

RPM Id (view only)

The unique number associated with the RPM.

Name

Specify the unique name of the RPM (up to 20 characters).

Status (view only)

The current status of the RPM. Any error status will be shown here.

Vendor (view only)

The manufacturer of the RPM.

Model (view only)

The model of the RPM. The model is read from the device, if it is provided; not all

RPMs provide a model string. If the device normally provides the device model and

becomes unreachable, or does not provide a model string, the Model is derived from

the supported model list strings.

# of Outlets

Specify the number of outlets on the RPM (maximum of 120 outlets).

Outlets On (view

only)

The number of outlets that are currently turned on, if this information is provided by

the RPM.

F/W Version (view

only)

The firmware version of the RPM, if this information is provided by the RPM.

Serial Num (view

only)

The serial number of the RPM, if this information is provided by the RPM.

MAC Address (view

only)

The MAC address of the RPM, if this information is provided by the RPM.

Summary of Contents for EMG Series



































































































































































































































































































































































































































































































Search results

Summary of Contents for EMG Series

Reviews:

Related manuals for EMG Series

Brands by name

Popular brands

Lantronix EMG Series, User Manual

Search results

Summary of Contents for EMG Series

Reviews:

Related manuals for EMG Series

Brands by name

Popular brands