Lantronix EMG Series, User Manual

Page: 329 / 482

14: User Authentication
EMG™ Edge Management Gateway User Guide 329
Note: To clear fields in the lower part of the page, click the Clear Custom Menu button.
3. You have the following options:
- To save the custom menu without any more commands than the default logout
command, click the Add Custom Menu button.
- To add menu commands, select the QuickEdit Mode box. This will move the cursor from
Command to Nickname and back to Command (if Nicknames is selected), or keep the
cursor on Command (if Nicknames is not selected). Commands (and the optional
nicknames) are added to the Menu Commands/Nicknames list when carriage return is
entered at the Command field (if Nicknames is not selected) or the Nickname field (if
Nicknames is selected). Most browsers have a "Select All" keystroke (such as Control-A)
which allow you to select all of the text in a field; this can be used in conjunction with the
Delete key to clear the contents of a field before entering a new command or nickname.
The Clear Command & Nickname button can also be used to delete the contents of the
Command and Nickname fields.
Commands can also be added to the list when
QuickEdit Mode is not selected. Enter the
command and the optional nickname and click the right arrow . The command will be
added before the logout command (if a command/nickname is not selected in the list) or
will replace the currently selected command/nickname in the list. The Unselect
Command & Nickname button can be used to unselect the currently selected command/
nickname in the list.
4. To add more commands to the custom menu, repeat step 3.
5. You also have the following options:
- To edit a command/nickname in the custom menu, select the command in the
Commands/Nicknames List box and select the left arrow button. Change the
command and/or the nickname, and with the same command still selected in the list,
select the right arrow button.
- To remove a command/nickname from the custom menu, select the command in the
Commands/Nicknames List box and select the Delete Command & Nickname button.
- To move a command higher up in the menu (the commands are shown in the order they
will be presented in the custom menu, with command #1 listed first), select the command
in the Commands/Nicknames List box and click the up arrow .
- To move a command further down in the menu, select the menu in the Commands/
Nicknames List and click the down arrow .
6. Click the Add Custom Menu button.
Menu Name Enter a name for the custom menu.
Title Enter an optional title which will be displayed about the menu at the CLI.
Nicknames Select to enable nicknames to be displayed in the menu instead of the
commands. If the custom menu will have nicknames, this should also be
selected prior to entering the commands in the web page, as this will facilitate
entry of the nicknames.
Redisplay Menu Select to redisplay the custom menu each time before the CLI prompt is
displayed.