Lantronix EMG 7500 User Manual Download Page 185

Page: 185 / 482

10: Device Ports

EMG™ Edge Management Gateway User Guide

185

Figure 10-3 Devices > Device Ports

Current port numbering schemes for Telnet, SSH, and TCP ports display on the left. The list of

ports on the right includes the individual ports and their current mode.

Note:

Icons that represent some of the possible modes include:

To set up Telnet, SSH, and TCP port numbering:

1. Enter the following:

Idle

The port is not in use.
The port is in data/text mode.

Note:

You may set up ports to allow Telnet access using the IP Setting per

Device Ports -

Settings (on page 187)

An external modem is connected to the port. The user may dial into or out of the port.

Telnet in or SSH in is enabled for the device port. The device port is either waiting for a Telnet

or SSH login or has received a Telnet or SSH login (a user has logged in).

Summary of Contents for EMG 7500



































































































































































































































































































































































































































































































Search results

Summary of Contents for EMG 7500

Reviews:

Related manuals for EMG 7500

Brands by name

Popular brands

Lantronix EMG 7500, User Manual

Search results

Summary of Contents for EMG 7500

Reviews:

Related manuals for EMG 7500

Brands by name

Popular brands